On This Page

TensorFlow: Getting Started

TensorFlow: Getting Started

This quick-start guide describes first-time user setup and user workflow for running TensorFlow jobs on a Cerebras Wafer-Scale Cluster. Cerebras Wafer-Scale Cluster is composed of CS-2 system(s), MemoryX, SwarmX, management and input worker nodes. The cluster supports two execution modes to enable ML models of different sizes:

  • Pipelined: In this mode, all the layers of the network are loaded together onto the Cerebras WSE. This mode is selected for neural network models that fit entirely on the WSE, approximately up to 1B parameters.

  • Weight Streaming: In this mode, one layer of the neural network model is loaded at a time. This layer-by-layer mode is used to run extremely large models (>1B parameters).

Perform the following steps to run your TensorFlow jobs on the Wafer-Scale Cluster:

  1. Ensure that the admin setup is complete. See Admin setup checklist.

  2. Follow the first-time user setup procedure for TensorFlow below. This includes creating and configuring your virtual environment. This step should be done only once.

  3. Wafer-Scale Clusters now adopt the same workflow to launch jobs for Pipelined execution and Weight Streaming execution. Please refer to page Running TensorFlow Models.

Note

If you are on the Original Cerebras Installation and have not upgraded to the Wafer-Scale Cluster, you can still use Slurm-based workflow to launch jobs for small to medium models with Pipelined execution. Large models with Weight Streaming execution are not supported on the Original Cerebras Installation. To get started on the Original Cerebras Installaion, see TensorFlow: Getting Started.

If you are ready to start developing / adapting your own TensorFlow code for CS System

Skip to Workflow for TensorFlow on CS for an in-depth development guide using TensorFlow for Cerebras.

First-time user setup for TensorFlow

The first time you use Wafer-Scale Cluster for your TensorFlow runs, you must set up a virtual environment as shown below.

Note

Make sure that you have the TLS Certificate available from your sysadmin. You need this to communicate between the user node and the Cerebras Wafer-Scale Cluster. Your admin will have shared the path to this file during the setup.

  1. Set up the Python virtual environment using Python 3.7. Create the environment named venv_cerebras_tf using the following command:

    python3.7 -m venv venv_cerebras_tf

  2. Cerebras provides three main packages to set up virtual environments: cerebras_appliance software package, the cerebras_tensorflow package if you are using TensorFlow, and the cerebras_pytorch package if you are using PyTorch. To set up your TensorFlow environment, you need two out of these three packages. Enter the following commands on the user node to install the required packages. Make sure to execute the commands in this order to install the appliance wheel first.

    source venv_cerebras_tf/bin/activate

pip install <path_to_wheels>/cerebras_appliance-<Cerebras release version>_<date>_<build>_<commit>-py3-none-any.whl --find-links=<path_to_wheels>
pip install <path_to_wheels>/cerebras_tensorflow-<Cerebras release version>_<date>_<build>_<commit>-py3-none-any.whl --find-links=<path_to_wheels>

Note

With the find-links command, it finds the correct cerebras_appliance version if you place all the wheels in the same directory.

Running TensorFlow jobs

After you have completed first-time user setup, please refer to page Running TensorFlow Models to get started.

previous

Running PyTorch Models

next

Running TensorFlow Models